B&G Network Pilot (ACP) - Manual (Page 98)

5 - 29
BOAT LAG CORRECT
BOAT LAG
INCORRECT
SETTING THE BOAT LAG VALUE
The autopilot must be disengaged and commissioning mode selected to
adjust the Boat Lag value.
Press
SETUP
key, select
BLG 0.3. Press
ENTER
key,
Display
flashes. Adjust the
value,
▲= value
up
▼= value
down Press
ENTER
key, the
value is
memorised
BOAT LAG VALUE TABLE
BOAT
TYPE DEFAULT
VALUE
TYPICAL
VALUE
SAIL
BOATS 0.30 0.3 to 1.0
POWER
BOATS 0.50 0.3 to 1.0
NOTE: The factory set value is selected by setting Boat Type and
Rudder Drive Type during commissioning.