B&G Network Pilot (ACP) - Manual (Page 12)

1 - 11
HAND-HELD CONTROLLER
DESCRIPTION
The hand-held remote controller is a waterproof unit that has six
function buttons and a status LED to indicate the operating mode of the
autopilot. The unit provides palm-of-the-hand control of the PILOT. The
cable has a 10 metres /30ft straight section, plus a coiled length that
extends from 1 metre to 3 metres.
SITING THE HAND-HELD UNIT
• At a convenient position within easy reach of the helmsman.
• Ensure at all times the hand-held remote controller's cable does not
become snagged on any moving parts e.g. throttle controls.
MOUNTING PROCEDURE
• Heavy duty self-adhesive Velcro strip is supplied with the unit.
• Clean and de-grease the site, stick the Velcro firmly in place.