B&G H5000 Analogue Expansion - Manual (Page 3)

2
| Preface | H5000 Installation
Declarations and conformance
This equipment is intended for use in international waters as coastal
sea area administered by countries of the E.U. and E.E.A.
The H5000 system complies with the following regulations:
• CE under EMC directive 2004/108/EC
• Level 2 devices of the Radio communications (Electromagnetic
Compatibility) standard 2008
• The relevant Declaration of conformity is available in the H5000
section on the following website: www.bandg.com
H5000 displays meet the technical standards in accordance with Part
15.103 of the FCC rules.
About this manual
This manual is a reference guide for installing and commissioning
the H5000 Instrument and autopilot system. The manual assumes
that the installer has at very least, basic knowledge of DC electrical
systems, and of working with power tools with materials such as
fi berglass and wood.
An understanding of basic navigation, nautical terminology and
practices may be helpful in correct confi guration of the product.
!
Warning : It is your sole responsibility to install and use the
instrument and transducer(s) in a manner that will not cause
accidents, personal injury or property damage. Always observe safe
boating practices.
 Note:
The choice, location, and installation of transducers and other
components of the system are critical to the performance of the
system as intended. If in doubt, consult your dealer.
 Note:
Global Positioning System: The Global Positioning System
(GPS) is operated by the US Government which is solely responsible
for its operation, accuracy and maintenance. The GPS is subject to
changes which could aff ect the accuracy and performance of all GPS
equipment anywhere in the world, including this system.