Great Plains PT8030 V1013 Operator Manual - Manual (Page 7)

5
Important Safety Information
PT6030 and PT8030 Pull-Type Planter 401-032M-A 10/10/12
Great Plains Mfg., Inc.
818-230
Red Reflector
818-229C
Amber Reflector
Safety Labels
Your implement comes equipped with all safety labels in place.
They were designed to help you safely operate your implement.
1. Read and follow label directions.
2. Keep all safety labels clean and legible.
3. Replace all damaged or missing labels. Order new labels
from your Great Plains dealer. Refer to this section for
proper label placement.
4. When ordering new parts or components, also request cor-
responding safety labels.
5. To install new labels:
a. Clean the area on which the label is to be placed.
b. Peel backing from label. Press firmly on surface,
being careful not to cause air bubbles under label.
818-003C
Slow Moving Vehicle Label
14945
14955
12356