Great Plains PT8030 V1013 Operator Manual - Manual (Page 48)

46
Section 6 Options
10/10/12 PT6030 and PT8030 Pull-Type Planter 401-032M-A
Great Plains Mfg., Inc.
Section 6
Options
12419
Marker Attachment
The Pull-Type Planter Marker is a center ground marking
disk unit which can be mounted on either the right or left side
of the planter or both. When mounted on both ends, the con-
trols can be on separate hydraulic circuits or, by the means of
sequence valve, alternate activation between markers from
a single hydraulic circuit.
For additional information refer to:
For additional information refer to:
• “Important Safety Information” on page 1
• “Marker Operation” on page 14
• “Marker Adjustments” on page 29
• “Section 4 Troubleshooting” on page 32
• “Section 5 Maintenance and Lubrication” on page 35
Marker Bundles
6 Row 30” Pull-Type Planter Marker
8 Row 30” Pull-Type Planter Marker
12204
Coulter Option
The Unit Mount Coulter Option mounts on the row units with
a cam-operated depth adjustment. The coulter tills a narrow
strip immediately ahead of the openers.
For additional information refer to:
• “Opener Adjustments” on page 26
• “Section 5 Maintenance and Lubrication” on page 35
Coulter Bundles
5/8” Wavy Coulter
3/4” Wavy Coulter
Turbo Coulter