Transport checklist – Great Plains YP2425A Operator Manual User Manual
Page 36
32
YP2425A
Great Plains Manufacturing, Inc.
401-626M
2014-02-10
Transport Checklist
❑ If heading to the field, before departing, ensure that
opener depth, seed rate and fertilizer rate have been
determined, or that the necessary data is with you.
❑ Plan the route. If towing a cart hitched to the planter,
plan the route so that no reverse movements will be
necessary. Avoid steep hills. Keep clearances in
mind. Folded, your YP2425A Planter may be nearly
15 feet (4.6 m) wide and 13 feet (4 m) high.
❑ Close slide gates on hoppers or seed boxes.
❑ Hitch.
Make both electrical and hydraulic connections. See
“Hitching Tractor to Planter” on page 14. For
hydraulic hitch, check that safety chain is anchored.
❑ If markers are unfolded, fold them.
See “Folding the Markers” on page 38.
❑ Raise planter.
See “Raising/Lowering Planter” on page 26
❑ Install lock-up channels on lift cylinders.
See “Lift Cylinder Lock-Up” on page 30.
❑ If planter wings are unfolded, fold them.
See “Folding the YP2425A Planter” on page 28.
Make sure wing locks are engaged.
❑ Make sure caster locks are disengaged. See
“Folding the YP2425A Planter” on page 28.
❑ 3-point hitch:
Lower hitch fully to ensure wings remain locked.
Hydraulic hitch:
Confirm CFM set to Hitch and hitch circuit in Float.
❑ Check all lights. Always have lights on for highway
operation.
❑ Comply with all national, regional and local safety
laws when traveling on public roads.
❑ Travel with caution.