Fertilizer carts, Pull-type fertilizer carts, Semi-mounted fertilizer carts – Great Plains YP2425A Operator Manual User Manual
Page 128

124
YP2425A
Great Plains Manufacturing, Inc.
401-626M
2014-02-10
Fertilizer Carts
Pull-Type Fertilizer Carts
These tank carts were designed for use with the Planter
Type 3 Fertilizer manifold. The cart’s pump is controlled
by the DICKEY-john
®
seed monitor on the planter. The
PFC2000 (shown at right) is for use with both Type 2 and
Type 3 manifolds.
Use of either tank with the Planter requires the Trailer
Hitch Weldment and at least one Fertilizer Manifold
system.
The smaller 400 gallon tank on model PFC2000 does not
include a pump, and relies on a planter-mounted Ground
Drive Fertilizer pump (ordered separately).
Semi-Mounted Fertilizer Carts
The SML tank carts were designed for use with the
Type 2 fertilizer manifold. These carts require a
planter-mounted Ground Drive Fertilizer pump
(purchased separately), but do not require a planter rear
pintle hitch weldment. The carts include 2-point
quick-hitch hardware for attaching to the rear seed cart
cross-tube.
Use of either tank with the Planter requires at least one
Fertilizer Manifold system and a planter-mounted
Ground Drive Fertilizer pump (both ordered separately).
Description
Order Number
1600 gallon (6057 liter)
Tank and Pump
PFC1600
(not shown)
1600 g. (6057 l.) Tank & Pump
w/400 gal (1514 liter) Tank
PFC2000
(shown at right top)
Description
Order Number
1035 gallon (3900m l.) Tank Cart
SML-1000
(mid left)
735 gallon (2800 liter) Tank Cart
SML-735
(upper right)
510 gallon (1900 liter) Tank Cart
SML-500
(bottom)
26078
31506