Great Plains 3S-4000F Operator Manual - Manual (Page 44)

40 3S-4000 Table of Contents Index Great Plains Manufacturing, Inc.
195-394M Table of Contents Index 2014-06-10
Transport Checklist
Before transporting the drill check the following items.
❑ Transport only with a tractor of proper size. See
“Specifications and Capacities” on page 96
❑ Hitch drill securely to tractor. Always use a
locking-style pin sized to match holes in hitch and
drawbar (minimum of 1-inch diameter). See
“Hitching Tractor to Drill” on page 21.
❑ Attach safety chain to an anchor on tractor capable
of pulling drill.
❑ Plug drill safety lights into tractor seven-pin
connector.
❑ Make sure drill is folded properly. See “Folding” on
page 26.
❑ Lock openers up into road position. See “Opener
Lock Up” on page 34.
❑ Secure cylinder lock channels on transport-cylinder
rods and front box lift cylinders. Allow transport lift
cylinders to settle against lock channels. See
“Folding” on page 26.
❑ Comply with all national, regional and local safety
laws when traveling on public roads.
❑ Travel with caution.
Marker Transportation
Refer to Figure 34
Always transport markers folded flat. Make sure second
marker section rests securely on transport carrier
.
Figure 34
Marker in Transport Position
18857
1
1