Storage – Great Plains 3S-3000HDF Operator Manual v1 User Manual
Page 49
Great Plains Manufacturing, Inc.
Operating Instructions
45
2014-07-01
195-441M
Storage
Store the drill where children do not play. If possible,
store it inside for longer life.
1.
Perform the drill Parking checklist.
2.
If storing with openers lowered, disconnect seed
hoses at openers to prevent deformation.
3.
Lubricate the drill at all points listed under
“Lubrication” on page 83.
4.
Check all bolts, pins, fittings and hoses. Tighten,
repair or replace parts as needed.
5.
Check all moving parts for wear or damage. Make
notes of any parts needing repair before the next
season.
6.
Thoroughly clean the drill boxes and feed cups as
described under “Materials Clean-Out” on page 67.
Do not store the drill with fertilizer or seed-treatment
residue in the boxes and cups.
7.
Plug or cap seed delivery and fertilizer tubes to
prevent pest entry.
8.
Apply grease to exposed cylinder rods to prevent
rust.
9.
Use touch-up paint to cover scratches, chips and
worn areas to prevent rust.