Great Plains TC5319 Assembly Manual - Manual (Page 11)

04/12/2012 Table of Contents Index 566-046E
Great Plains Manufacturing, Inc. Table of Contents Index 7
Assembly
5109-5315 Center Transport
Refer to Figure 5
11. Once the center Frame has been uncrated, carefully
turn the center frame upside down and set on blocks
to assemble torque tube.
12. Carefully raise the torque tube with an overhead
hoist and secure with 1 1/4 x 7 pins , 3/8 x 2 1/4 Gr.
8 hex bolts and 3/8 top lock nut.
13. Install pre-assembled hub assembly into torque
tube. Align hole in spindle with hole in torque tube,
secure with 1/2 x 4 1/2 hex bolt
and 1/2 top lock
nut.
14. Attach the tire/wheel assembly to hub assembly
and secure with 5/8 lug nuts .
15. All bolts may be tightened to specs, See “Torque
Values Chart” on page 27.
Note: Fasten the bottom of the torque tube to frame with
chain or straps so it does not swing down and hit
something while turning center frame over. Care-
fully use hoist to turn center frame over and set on
stands to finish assembling components.
5317-5323 Center Transport
Refer to Figure 6
16. Once the center Frame has been uncrated, carefully
turn the center frame upside down and set on blocks
to assemble torque tube.
17. Carefully raise the torque tube with an overhead
hoist, attach to center frame and secure with 1 1/4 x
7 pins
, 3/8 x 2 1/4 Gr. 8 hex bolts and 3/8 top
lock nut.
18. Install the walking axle receiver assemblies into
torque tube, secure with 1/2 x 6 Gr. 8 hex bolt and
1/2 top lock nut.
19. Install pre-assembled 8-bolt hub assemblies into
walking axle receiver . Align holes in spindle with
hole in walking axle receiver, secure with 1/2 x 5 Gr.
8 hex bolt
and 1/2 top lock nut.
20. Attach the tire/wheel assembly to hub assembly
and secure with 5/8 lug nuts .
21. All bolts may be tightened to specs, See “Torque
Values Chart” on page 27.
Note: Fasten the bottom of the torque tube to frame with
chain or straps so it does not swing down and hit
something while turning center frame over. Care-
fully use hoist to turn center frame over and set on
stands to finish assembling components.
Figure 5
5109-5315 Center Transport
42624
2
6
3
1
U
D
F
B
L
R
4
5
7
1
2
3
4
5
6 4
7
Figure 6
5317-5323 Center Transport
42625
2
9
3
1
U
D
F
B
L
R
6
7
5
8 4
1
2 3
4
5
6
4
7
8 6
9