Great Plains 3S-5000HD Assembly Instructions - Manual (Page 26)

22 3S-5000/F/HD/HDF SGS Table of Contents Index Great Plains Manufacturing, Inc.
133-415M Table of Contents Index 2013-07-30
Install Seed Boxes
Identify Box Assemblies
There are six small seed box assemblies, two for each
drill section, and LH and RH for each section.
Due to box widths, drive input, setting handle location,
mounting holes and decals, there are distinct part
numbers for each section and side (6 unique assemblies
per row spacing).
Look for tags or grease pen markings on the assemblies,
or use the tips at right.
• Wing boxes are longer than Center section boxes.
• RH boxes have a sprocket on the right end of the
shaft.
• LH boxes have a bare hex shaft (with hole for coupler
pin) on the right end of the shaft.
• The Left Wing RH box has the rate handle.
• The Right Wing LH box has the rate handle.
Figure 33:
Small Seeds Box Assemblies (10 inch row spacing depicted)
34593
Box Assembly Row Spacing Box Assembly
133-393K 6 Inch 133-394K
133-403K 7.5 Inch 133-404K
133-413K 10 Inch 133-414K
LH Wing LH LH Wing RH
Center RH Center LH
RH Wing LH RH Wing RH
Box Assembly Row Spacing Box Assembly
133-388K 6 Inch 133-391K
133-399K 7.5 Inch 133-401K
133-409K 10 Inch 133-411K
Box Assembly Row Spacing Box Assembly
133-386K 6 Inch 133-383K
133-395K 7.5 Inch 133-397K
133-405K 10 Inch 133-407K