Front drive, center and right sections – Great Plains 3S-5000HD Assembly Instructions User Manual
Page 20

16
3S-5000/F/HD/HDF SGS
Great Plains Manufacturing, Inc.
133-415M
2013-07-30
Front Drive, Center and Right Sections
Refer to Figure 21
58. Select one each new:
195-269H 40’-3S FERT DRIVE WELDMENT RH
802-034C HHCS 1/2-13X1 1/4 GR5
804-015C WASHER LOCK SPRING 1/2 PLT
803-020C NUT HEX 1/2-13 PLT
59. Position the weldment
at the front right corner
of the mainframe. Align the right edge of the
weldment against the frame side rail, and position
the right rear hole over a hole
in the frame
gusset. Make sure both left base holes are on either
side of the front frame tube (to accept U-bolt at
step 62). Insert a bolt
through the right rear
hole
of the weldment base. Loosely secure with a
lock washer
and nut
.
60. Select one each new:
133-324K SML SDS ON FERT JS MNT ASY
806-060C U-BOLT 1/2-13 X 6 1/32 X 7 1/4
802-034C HHCS 1/2-13X1 1/4 GR5
and three sets new of:
804-113C WASHER FLAT 1/2 USS HARD PLT
804-015C WASHER LOCK SPRING 1/2 PLT
803-020C NUT HEX 1/2-13 PLT
61. Position the Small Seeds drive
on top of the
fertilizer weldment
.
62. Install the U-bolt
up through the left side holes
of the drive and loosely secure with flat
washers
, lock washers
and nuts
.
Insert bolt
through washer
, and right
forward hole of drive (not visible in Figure). Add lock
washer
, another flat washer
, and nut
.
Tighten all nuts.
Refer to Figure 22 (drive shown without drill frame)
63. Select one new:
822-119C BRG 7/8HEXX2.05OD SPH
and two sets new:
822-032C FLANGETTE 52 MST
802-282C RHSNB 5/16-18X1 GR5
804-009C WASHER LOCK SPRING 5/16 PLT
803-008C NUT HEX 5/16-18 PLT
64. At the Small Seeds drive, sandwich the bearing
between the flangettes
, and mount the
assembly at the forward open flangette hole
of
the fertilizer weldment
. Mount from the left
(outside the drive), with the bolts
inserted from
the right. Secure with lock washers
and
nuts
.
U
D
F
B
L
R
179
227
194
213
1
135
241
227
213
236
Figure 21:
Small Seeds Drive
Center Section w/o Fertilizer
34592
179
194
227
213
179
1
194
1
227
213
135
241
194
236
227
213
U
D
F
B
L
R
Figure 22:
Small Seeds Input Bearing
27442
261
4
211
260
224
204
135
179
241
236
227
213
194
236
227
236
213
261
260
204
224
211
261
260
4
179
204
224
211