Safety decals, Safety reflectors and decals, Reflector: slow moving vehicle (smv) – Great Plains 3P1006NT Operator Manual User Manual
Page 9: 055c, Reflectors: red, 266c, Reflectors: amber
Great Plains Manufacturing, Inc.
Important Safety Information
5
2011-12-20
151-144M
Safety Decals
Safety Reflectors and Decals
Your implement comes equipped with all lights, safety
reflectors and decals in place. They were designed to
help you safely operate your implement.
▲ Read and follow decal directions.
▲ Keep lights in operating condition.
▲ Keep all safety decals clean and legible.
▲ Replace all damaged or missing decals. Order new decals
from your Great Plains dealer. Refer to this section for
proper decal placement.
▲ When ordering new parts or components, also request
corresponding safety decals.
To install new decals:
1.
Clean the area on which the decal is to be placed.
2.
Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.
Reflector: Slow Moving Vehicle (SMV)
On top of lift assist pivot weldment;
1 total
See “Transporting” on page 25.
Reflectors: Red
On rear face of lift assist cross tube, outside daytime
reflectors;
2 total
See “Transporting” on page 25.
Reflectors: Amber
On side frames at walkboard ends,
on front face of lower front tool bars, outside ends;
4 total
See “Transporting” on page 25.
818-055C
32686
838-266C
32686
838-266C
32686