Great Plains 3S-4000HDF Operator Manual - Manual (Page 8)

4 3S-4000HD/HDF Table of Contents Index Great Plains Manufacturing, Inc.
195-067M Table of Contents Index 2013-06-13
Remain Clear of Overhead Lines
▲ If the drill contacts a power line, lethal voltage may be
present on all metal parts. At higher voltage, the drill does
not need to be in line contact for the hazard to exist.
Maintain at least 10 foot (3 m) clearance.
▲ Electrocution can occur without direct contact between the
energized drill and a person near the drill.
▲ Watch for sagging, damaged or low electrical lines.
Overhead lines at farm structures are a particular hazard.
▲ Watch for all electrical lines during folding and unfolding
operations. Use a spotter during folding and unfolding.
Know the location and height of all lines during transport
and in fields.
▲ If an electrical hazard is observed while on the ground near
the drill, hop at least 30 m (100 feet) away with both feet
together and summon professional help. At higher voltage,
lethal voltage gradients can also be present at the soil
surface.
▲ Consult your tractor manual for advice on how to respond
to an electrical hazard event while in the cab.
Transport Machinery Safely
Maximum transport speed for implement is 20 mph (32
kph), 13 mph (22 kph) in turns. Some rough terrains
require a slower speed. Sudden braking can cause a
towed load to swerve and upset.
▲ Carry reflectors or flags to mark drill in case of breakdown
on the road.
▲ Verify that the implement is properly folded (page 27).
▲ Keep clear of overhead power lines and other obstructions
when transporting. Refer to transport dimensions under
“Specifications and Capacities” on page 103.
▲ Do not exceed 20 mph. Never travel at a speed which does
not allow adequate control of steering and stopping.
Reduce speed if towed load is not equipped with brakes.
▲ Reduce speed on rough roads.
▲ Comply with national, regional and local laws.
▲ Do not fold or unfold the drill while the tractor is moving.