Great Plains 3S-4000HDF Operator Manual - Manual (Page 102)

195-067M Table of Contents Index 2013-06-13
98 3S-4000HD/HDF Table of Contents Index Great Plains Manufacturing, Inc.
Options
Hitches
One hitch is selected upon initial order of a
3S-4000HD/HDF Drill, and includes the spring wire loop,
safety chain, and all fasteners. Additional hitches may be
ordered for conversion in the field, and include extra hitch
mounting bolts, lock washers and nuts.
Open Center Conversion
The standard 3S-4000HD/HDF drill is compatible with
tractors having “active” or “closed center” hydraulic
systems. For use with “non-active” or “open center”
tractors, a conversion kit is available. Order one kit per
drill.
For operations, see “Tractors with Open Center
Hydraulics” on page 22.
Two Outlet Hydraulic Kit
The standard 3S-4000HD/HDF drill requires three
remote outlet circuits on the tractor. If only two are
available, this kit enables the Transport and Opener Lift
circuits to share a single remote, via a selector valve on
the tongue at the hitch. Order one kit per drill.
For operations, see “Lift Selector Valve Operation” on
page 44.
Hitch Description Part Numbers
Large Strap 170-038A
Clevis 170-039A
Small Strap 170-059A
26487
1
2
3
1
2
3
Description Part Number
Open Center Hydraulic Kit 194-143A
BASE END
, CENTER OPENERS
ROD END
, CENTER OPENERS
BASE END
, WING OPENERS
ROD END
WING OPENERS
1200 600
0 3000
1800
2400
psi
1200 600
0 3000
1800
2400
psi
P
G
R
T
P
G
R
T
3
1
2
LOWER
TO TRACTOR
RAISE
1
2
3
1
2
3
FILTER
18750
Description Part Number
Two Outlet Tractor Conversion 194-122A
15550