Great Plains PD8070 Operator Manual - Manual (Page 19)

1/24/2006 401-266M
17 Operating Instructions
Operating Instructions
This section covers general operating proce-
dures. Experience, machine familiarity and the
following information will lead to efficient opera-
tion and good working habits. Always operate
farm machinery with safety in mind.
Prestart Checklist
!
WARNING
Escaping fluid under pressure can have sufficient pres-
sure to penetrate the skin. Check all hydraulic lines
and fittings before applying pressure. Fluid escaping
from a very small hole can be almost invisible. Use pa-
per or cardboard, not body parts, and wear heavy
gloves to check for suspected leaks. If injured, seek
medical assistance from a doctor that is familiar with
this type of injury. Foreign fluids in the tissue must be
surgically removed within a few hours or gangrene
will result.
1. Carefully read “Important Safety Information,”
page 1.
2. Lubricate planter as indicated under “Lubrica-
tion,” page 43.
3. Check all tires for proper inflation. See “Ap-
pendix,” page 52.
4. Check all bolts, pins and fasteners. Torque as
shown in “Appendix,” page 52.
5. Check planter for worn or damaged parts. Re-
pair or replace parts before going to the field.
6. Check that hoppers are free of dirt and debris.
Turn meter-drive shaft by hand to be sure
drive shaft and seed meter turn freely.