Great Plains PD8070 Operator Manual - Manual (Page 10)

PD8070
401-266M 1/24/2006
8
838-265C
Amber Reflectors
On the left-hand wing by drive, two on each side of
frame when folded and two on the front of the light
brackets, seven total
Safety Decals
Your implement comes equipped with all safety
decals in place. They were designed to help you
safely operate your implement.
▲ Read and follow decal directions.
▲ Keep all safety decals clean and legible.
▲ Replace all damaged or missing decals. Order
new decals from your Great Plains dealer.
Refer to this section for proper decal place-
ment.
▲ When ordering new parts or components, also
request corresponding safety decals.
▲ To install new decals:
1. Clean the area where the decal is to be
placed.
2. Peel backing from decal. Press firmly on
surface, being careful not to cause air
bubbles under decal.
818-055C
Slow Moving Vehicle Label
On the back of the planter, one total
24132
23455
838-267C
Daytime Reflectors
On the back of walkboard each end and on the back-
side of each light mounting bar, four total
23455