Safety labels, 229c, 003c – Great Plains PT8030 V1012 Operator Manual User Manual
Page 7

5
Important Safety Information
PT6030 and PT8030 Pull-Type Planter 401-032M
10/10/12
Great Plains Mfg., Inc.
818-230
Red Reflector
818-229C
Amber Reflector
Safety Labels
Your implement comes equipped with all safety labels in place.
They were designed to help you safely operate your implement.
1. Read and follow label directions.
2. Keep all safety labels clean and legible.
3. Replace all damaged or missing labels.
4. Some new equipment installed during repair require safety
labels to be affixed to the replaced component as specified
by the manufacturer. When ordering new components make
sure the correct safety labels are included in the request. To
order new labels go to your
Great Plains dealer.
5. Refer to this section for proper label placement.
To install new labels:
a.
Clean the area the label is to be placed.
b.
Peel backing from label. Press firmly on surface
being careful not to cause air bubbles under label.
818-003C
Slow Moving Vehicle Label
14945
14955
12356