Great Plains PT8030 V1012 Operator Manual - Manual (Page 4)

Use Safety Lights and Devices
Slow moving tractors, self-propelled
equipment and towed implements or at-
tachments can create a hazard when
driven on public roads, and are difficult to
see, especially at night.
Flashing warning lights and turn signals
are recommended whenever driving on
public roads. Use the lights and devices
provided with your machine.
Keep safety signs and lights in good condition. Replace
any missing or damaged items.
Transport Machinery Safely
Comply with state and local laws when
transporting machinery.
Maximum transport speed for planter is 20
mph. DO NOT EXCEED. Never travel at a
speed which does not allow adequate con-
trol of steering and stopping.
Braking from transport speed can cause a
towed load to swerve and upset. Reduce
speed if towed load is not equipped with
brakes.
Use the following recommended speed-
weight ratios as a guideline:
● Maximum speed of 20 mph when weight
of towing load is less than or equal to the
weight of your tractor.
● Reduce speed to 10 mph when weight of towed load
is up to double the weight of your tractor.
● Do not tow a load which is more than double the
weight of your tractor.
Use a Safety Chain
A safety chain will help
control drawn machin-
ery should it separate
from the tractor draw-
bar.
Use a chain with the
strength rating equal to
or greater than the gross weight of the towed machin-
ery.
Attach the chain to the tractor drawbar support or other
specified anchor location. Allow only enough slack in
the chain to permit turning.
Do not use safety chain for towing.
Escaping hydraulic oil can have ex-
tremely high pressure which can
penetrate the skin causing serious
injury.
Avoid this hazard by relieving all hy-
draulic pressure before disconnect-
ing any lines. Be sure all connections are tight before
applying pressure.
Protect hands and body from high pressure fluids. Use
a piece of cardboard or wood to detect leaks.
If an injury is caused by escaping hydraulic fluid. SEE A
DOCTOR IMMEDIATELY! The fluid must be surgically
removed within a few hours or gangrene will result
Avoid High Pressure Fluids Hazard
Understand maintenance proce-
dure before doing work. When ser-
vicing machine use proper tools
and equipment. Refer to operator’s
manual.
Keep hands, feet, and clothing
away from power-driven parts. Dis-
engage all power and relieve pres-
sure.
Lower machine to the ground. Stop
tractor engine and remove the key.
Allow machine to cool before ser-
vicing.
Keep the area clean and dry.
Securely support machine compo-
nents that will be raised during service.
Disconnect battery ground cable (-) before servicing or
adjusting electrical systems or before welding on ma-
chine.
Make sure all parts are properly installed and in good
condition. Fix any damage immediately and replace
worn or broken parts. Remove buildup of grease, oil or
debris.
Practice Safe Maintenance
2
Important Safety Information
10/10/12 PT6030 and PT8030 Pull-Type Planter 401-032M
Great Plains Mfg., Inc.
Prior To Operation
1. Practice safety by always thinking before acting.
2. Make sure safety rules are understood before operating ma-
chine or tractor.
3. Loose fitting clothing should not be worn as it may catch in
moving parts.
4. Never attempt to operate the implement unless you are in
the driver's seat.
5. Never dismount from a moving tractor.