Great Plains PT8030 V1012 Operator Manual - Manual (Page 11)

9
Introduction
PT6030 and PT8030 Pull-Type Planter 401-032M 10/10/12
Great Plains Mfg., Inc.
Serial Number Plate
Refer to the Figure 1 for the location of your serial number
plate.
Serial Number Plate Location
Figure 1
14921
Great Plains
MANUFACTURING INCORPORATED
ASSARIA, KANSAS 67416 MODEL NO.
PT 6030
SERIAL NO.
GP-U0000000
For prompt service always use the serial number and model
number when ordering parts from your Great Plains deal-
er. Be sure to include your serial and model numbers in cor-
respondence also.
Your dealer wants you to be satisfied with your new ma-
chine. If for any reason you do not understand any part of
this manual or are not satisfied with the service received,
the following actions are suggested:
1. Discuss the matter with your dealership Service Man-
ager make sure he is aware of any problems you may
have and that he has had the opportunity to assist you.
2. If you are still not satisfied, seek out the Owner or
General Manager of the dealership, explain the prob-
lem and request assistance.
3. For further assistance write to:
Product Support
Great Plains Mfg. Inc., Service Department
P.O. Box 245
Assaria, Ks. 67416
Introduction
Great Plains welcomes you to the growing family of new
product owners. This implement has been designed with
care and built by skilled workers using quality materials.
Proper assembly, maintenance, and safe operating prac-
tices will help you get years of satisfactory use from the
machine.
Using This Manual
This Operator’s Section is designed to help familiarize you
with safety, assembly, operation, adjustments, trouble-
shooting, and maintenance. Read this manual and follow
the recommendations to help ensure safe and efficient
operation.
The warranty sheet should be filled out by the owner and
dealer at the time of purchase. After completion give the
dealer the white copy and send the pink copy to Great
Plains. Keep your copy in the manual for use when corre-
sponding with the dealer.
To order a new Operator or Parts Manual contact your au-
thorized dealer or write to the address listed below in the
Owner Assistance paragraph. Include the model and seri-
al numbers of your unit.
The information contained within this manual was current
at the time of printing. Some parts may change slightly to
assure you of the best performance.
Terminology:
"Right " or "Left" as used in this manual is determined by
facing the direction the machine will travel while in use un-
less otherwise stated.
Definitions:
NOTE: A special point of information related to it’s
preceding topic. The author’s intention is that you
read and note this information before continuing.
IMPORTANT: Information, related to it’s proceeding topic,
that the author feels would be of use.
Owner Assistance
If customer service or repair parts are required contact
your local Great Plains dealer. He has trained personnel,
repair parts, and the equipment needed to service your
implement.
These parts have been specially designed and should
only be replaced with genuine Great Plains parts.