Great Plains CTA4000 Predelivery Manual - Manual (Page 29)

Great Plains Manufacturing, Inc. Table of Contents Appendix Setup 25
2013-08-21 Table of Contents Appendix 160-037Q
Connect Secondary Seed Hoses
Secondary seed hose is 1 inch (2.5 cm) in diameter and
comes in 100-foot (30.5 m) rolls. The raw hoses will be
cut-to-length to connect each distribution tower outlet to
a row unit seed tube.
Do not cut hose until routed over implement. Lengths in table
are approximate. Actual lengths may vary from implement to
implement.
Refer to Figure 32
1.
Start with Tower 1 (far left tower). Loosen but do not
remove nuts
holding tower halves together.
Refer to Figure 33
2.
Start with tower Port 1 (closest to center of tower-mounting plate). Ports are numbered in ascending order
clockwise around tower.
1
2
Figure 32
Tower Outlet Hoses
17187
2
1
Figure 33
Tower Port 1 Locations
29342
T