Great Plains CTA4000 Predelivery Manual - Manual (Page 18)

14 CTA4000 & CTA4000HD Table of Contents Appendix Great Plains Manufacturing, Inc.
160-037Q Table of Contents Appendix 2013-08-21
Hitching an ADC2220 or ADC1150 Cart
ADC2220/1150 Hitch Link
Refer to Figure 12,
which, for clarity, depicts the air cart without the rear hopper
1.
Use a line (not shown), from the cart walkboard, to
tie the cart links
up, to the height of the lug
holes .
2. Drive the roll pins out of the lug pins and
remove the lug pins.
3. Have a tractor slowly guide the cart backwards until
the link arm ball swivels
are aligned lug holes in
the implement. Set tractor brake.
4. Insert and secure the lug pins on the implement.
5. Set tractor parking brake and shut off tractor.
ADC2220/1150 Electrical Connections
Make sure tractor is shut down with accessory power off
before making connections.
1. Mate the 16-pin implement harness plug to the
connector on the cart.
2
3
5
3
1
2
4
1
4
U
D
F
B
L
R
Figure 12
Hitching Cart to Implement
17176
1
5
2 3
4 5
3
Figure 13
ADC2220/1150 Seed Outlets
26434