Great Plains CTA4000 Predelivery Manual - Manual (Page 13)

Great Plains Manufacturing, Inc. Table of Contents Appendix Assembly 9
2013-08-21 Table of Contents Appendix 160-037Q
Mount Fold Cylinders
Refer to Figure 7
1.
Unstrap fold cylinders from center section.
2. Check that bushings are present in base end and
rod end lug holes.
3. Using washers, pins and cotter keys provided, pin
base ends of cylinders to center section
.
4. Note the assembly order of cylinder rod ends, but
leave rod ends disconnected. They will be connected
after bleeding hydraulics (page 16).
5. Route hydraulic hoses under hose clamps on
frame.
3
2
3
1
1
1
U
D
F
B
L
R
Figure 7
Mount Fold Cylinders
17192
1
2
3