Great Plains CTA4000 Predelivery Manual - Manual (Page 12)

8 CTA4000 & CTA4000HD Table of Contents Appendix Great Plains Manufacturing, Inc.
160-037Q Table of Contents Appendix 2013-08-21
Refer to Figure 5
1.
Mount wheel assembly on hub using
1 ⁄
2
-20 bolts.
2. Tighten all bolts as specified in “Torque Values
Chart” on page 30.
3. Repeat for right caster.
Bolt wheels with edge of center dish in toward hub as shown in
Figure 5.
Mount Gauge Wheels
Refer to Figure 6
1.
Jack up frame and support with jack stands or
blocks.
Refer to Figure 5
2.
Mount tires on hubs.
Interference and Equipment Damage Risks:
Bolt wheels with edge of center dish in toward hub as shown in
Figure 5.
3. Secure wheel assemblies on hubs using
1 ⁄
2
-20 bolts.
Tighten bolts as specified in “Torque Values Chart”
on page 30.
Figure 5
Caster Wheel Orientation
17227
9
Figure 6
Gauge Wheel Installation
17175