Maintenance safety, Safety decal locations, Decal installation – Wheatheart GHR 80/100 x 31-71ft Augers EMD User Manual
Page 12: Decal locations, Maintenance safety 2.7. safety decal locations, Decal installation 2.7.2. decal locations

2. S
AFETY
F
IRST
W
HEATHEART
- G
RAIN
A
UGER
EMD
2.6. M
AINTENANCE
S
AFETY
GHR 80
X
31’-71’ & 100
X
31’-71’
12
30642 R0
2.6. MAINTENANCE SAFETY
• Shut down and lock out all power before attempting maintenance of any kind.
If applicable, disconnect PTO driveline from tractor or hydraulic hoses on
units with hydraulic drive hoppers.
• After maintenance is complete, replace and secure all safety guards and
safety devices, and if applicable, service doors and cleanout covers.
• Support auger tube before attempting maintenance on the undercarriage
assembly. Auger should be in full down position for maintenance.
• Use only genuine Wheatheart replacement parts or equivalent. Replacement
parts such as intake guards, pulley guards, PTO driveline shields, winches,
and lift cables must meet ASABE standards or serious injury may result. Use
of unauthorized parts will void warranty. If in doubt, contact Wheatheart or
your Wheatheart dealer.
• Do not modify any auger components without authorization from Wheatheart.
Modification can be dangerous and result in serious injuries.
2.7. SAFETY DECAL LOCATIONS
• Keep safety decals clean and legible at all times.
• Replace safety decals that are missing or have become illegible. See decal
location figures below.
• Replaced parts must display the same decal(s) as the original part.
• Safety decals are available from your distributor, dealer, or factory.
2.7.1. D
ECAL
I
NSTALLATION
1. Decal area must be clean and dry, with a temperature above 10°C (50°F).
2. Decide on the exact position before you remove the backing paper.
3. Align
the
decal over the specified area and carefully press the small portion
with the exposed sticky backing in place.
4. Slowly peel back the remaining paper and carefully smooth the remaining
portion of the decal in place.
5. Small air pockets can be pierced with a pin and smoothed out using the sign
backing paper.
2.7.2. D
ECAL
L
OCATIONS
Replicas of the safety decals that are attached to the equipment are shown
below. Good safety requires that you familiarize yourself with the various safety
decals and the areas or particular functions that the decals apply to as well as
the safety precautions that must be taken to avoid serious, injury, death, or
damage.
* Wheatheart reserves the right to update safety decals without notice. Safety
decals may not be exactly as shown.