Monarch Instrument DC6000 - Manual (Page 87)

Section 5 – Recorder Setup
I.
Page 79
1/06/2012 REV 1.10.2
Fig 5.7.3.2 – Date / Time Setup
Time: To change the time – tap on the hour, min, secs
accordingly then adjust using the up and down arrow keys.
Daylight Savings: To enable daylight savings (USA) check
the daylight savings box
Date: To change the date – select the date on the calendar.
Use the left or right arrows to change the month.
Alternatively by tapping the month a menu will pop up
allowing the month to be selected. If you tap the year as set
of up/down arrows will appear to allow the year to be set.
Time Zone: Select the time zone by tapping the drop down
menu button and selecting the time zone you are in.
Once the time and date have been set tap the APPLY button
then tap the OK button. To simply cancel any settings tap the
X button. This will take you back to the previous menu.
Once the changes have been made press the accept button to exit or the cancel button to
quit without saving the changes.