Monarch Instrument DC6000 - Manual (Page 106)

Section 6 - Communication
I.
Page 98
1/06/2012 REV 1.10.2
6.6 Utility Programs
The utility programs provide a method of communicating with the recorder to move data or control operation remotely.
The programs are on the CD that came with the unit. To install the programs, insert the CD in the Drive (Windows
based PCs) and it should auto launch. If it does not, run the program CD_Start.exe on the CD. The setup program has
various options as shown below:
Fig 6.5 – Recorder Setup Program
6.6.1 FTP Manager
FTP is short for File Transfer Protocol a standard for file transfer over the internet.
The FTP manager is a standalone file manager for
uploading and downloading files from remote recorders. It
is installed from the installation disk that came with the
recorder.
Refer to Fig 6.5 above. Click the “FTP Manager
Setup” button – This will launch the installer. Follow the
instructions and use the default file location as shown left.
Click “Next” and the installation will proceed. Once
installation is complete, click “Close” to finish.
If you selected the add icon option during installation it will
appear on your desktop