ClearOne XAP TH1 - Manual (Page 7)

TECHNICAL SUPPORT: 1.800.283.5936 (USA) OR 1.801.974.3760
3
INTRODUCTION • UNPACKING
Ensure that the following items (See Figure 1, below) were received with
your shipment:
Unpacking
Gentner Communications
is not responsible for prod-
uct damage incurred dur-
ing shipment. You must make
claims directly with the carrier.
Inspect your shipment carefully for
obvious signs of damage. If the
shipment appears to be damaged,
retain the original boxes and pack-
ing material for inspection by the
carrier. Contact your carrier imme-
diately.
!
12' Telephone Cable
PART 830-000-012
Push-on Blocks (2)
PART 673-016-003 XAP TH1
8' Power Cord
PART 699-150-006
PART 800-152-401
XAP TH1 Manual
Transmit Transmit Receive Receive On Off
H A P T 1
Transmit Receive
Figure 1. Equipment diagram
Features
Gentner’s 100% digital signal processing (DSP) technology ensures
crystal-clear audio with the deepest, most reliable hybrid null.
Easy to install and operate
Touch-tone dialing capability (40 character dial string)
Simultaneous two-wire/four-wire operation within a XAP 800 system
Continual adaptation to telephone line conditions
Full-time telco echo cancellation with 31 millisecond tail time
Conference up to 16 callers (with 16 XAP TH1s) within a XAP 800
system
Selectable caller automatic gain control (AGC)
Remote control via rear-panel connection
Digital anti-alias filter to minimize hum and Central Office switching
noise
Compatible with any analog telephone system
Program and operate with a connected PC or any other type of
serial remote control device
Telephone Hybrid
XAP
TH1
XAP
TH1