ClearOne XAP TH1 - Manual (Page 24)

TECHNICAL SUPPORT: 1.800.283.5936 (USA) OR 1.801.974.3760
20
APPENDIX A • SERIAL COMMANDS
RINGEN
This command changes or reports back the state of the ring indication.
RINGEN
Explanation: is the action (i.e. which ring indication, current state)
X=0 Parameter to set the state to OFF
X=1 Parameter to set the state to ON
X=2 Parameter to toggle the state from one state to
the other (regardless of current state)
X= Null Parameter to report back the current state.
Return Values: The command will return the updated condition of the
ring indication in the same format as the command.
TE
Controls and reports the connection status of the unit.
TE
Explanation: is the action (e.g. connect, disconnect, current state)
X=0 Parameter to set the unit to disconnect from
the line
X=1 Parameter to set the unit to connect to the line
X=2 Parameter to toggle the state from one state to
the other (regardless of current state)
X= Null Parameter to report back the current state.
Return Values: If the current connect state is ON, the following is
returned out the serial port: TE 1
If the current connect state is OFF, the following is returned out the
serial port: TE 0
Example:
The following connects the unit to the telephone line: TE 1
The following is returned out the serial port: TE 1
The following reports the connection state of the unit: TE
The following is returned out the serial port: TE 1