ClearOne XAP TH1 - Manual (Page 20)

TECHNICAL SUPPORT: 1.800.283.5936 (USA) OR 1.801.974.3760
16
APPENDIX A • SERIAL COMMANDS
Conventions
The following typographic conventions are used to set off parameters
and explain their function in command strings.
Convention Example Description
< > Mandatory parameters
[ ] [X] Optional parameters
– 1–8 Range between the values
, 4,7,9 List of available values
bold AA Command
AA
This command activates and deactivates the auto-answer feature.
AA
Explanation: is the action (i.e. auto-answer enable, auto-answer
disable, current state).
X=0 Parameter disables auto-answer
X=1 Parameter enables auto-answer
X=2 Parameter to toggle the state from one state to
the other (regardless of current state)
X= Null Parameter to report back the current state
This serial command only
functions if DIP switch 4 is
OFF (DOWN). ✍
XAP TH1 Serial Commands
Command Function Command Function
AA Auto-answer RING Ring acknowledgement
DIAL Dial touch-tones
Control/report the connect state of the unit HOOK Send hook-flash to the line
HOOKD Set hook-flash duration TERL Return telephone ERL
LVL Return transmit/receive level TERLE Return telephone ERLE
MUTE Control/report mute status* VER Return current version of software
NULL Renulls XAP TH1 to telephone line
* applied to a specific channel
TE
RINGEN . Changes or reports the state of ring indication