SARGENT 776 Controls - Manual (Page 4)

54- (switch monitors lever movement) and
Solenoid wiring
54 -
Switch
Connections
Solenoid
Connections
Orange (NC), 5
Green (NO), 4
White (C), 3
Red (+), 2
Black (-), 1
8
7 6
5 4
3 2
1
Solenoid and 54- wiring (5 wires)
5 wires
Electric Hinge
with 8-pin connectors
Pigtail harness with
8-pin connector
Lock, raceway, hinge and pigtail 8-pin terminations and wire colors all match
1. Install door. Plug electric hinge and lock 8-pin
connectors into raceway 8-pin connectors during hinge and lock installation.
2. Go to step 4 if wiring is to be done later. Wire to 54- pigtail wires as required.
Wiring diagram indicates lever in its normal position.
3. Refer to page 3 for solenoid wiring instructions.
4. Plug pigtail 8-pin connector into electric hinge 8-pin connector.
Mount electric hinge to frame.
5. Test lock.
54- wiring
54 - Prefix switch monitors lever movement
54 -
Switch
Connections
Orange (NC), 5
Green (NO), 4
White (C), 3
8
7 6
5 4
3 2
1
Orange (NC), 5
Green (NO), 4
White (C), 3
Electric Hinge
with 8-pin connectors
Pigtail harness
with 8-pin connector
Lock, raceway, hinge and pigtail 8-pin terminations and wire colors all match.
1. Install door. Plug electric hinge and lock 8-pin connectors into raceway 8-pin
connectors during hinge and lock installation.
2. Go to step 3 if wiring is to be done later. Wire to 54- pigtail wires as required.
Wiring diagram indicates lever in its normal position.
3. Plug pigtail 8-pin connector into electric hinge 8-pin connector.
Mount electric hinge to frame.
4. Test lock.
54-773, 54-774, 54-775 or
54-776ET with 8-pin connector
Raceway harness
with 8 & 4-pin
connectors
The 4-pin
connectors are
not used in this
application
54- 700ET series lock
with 8-pin connector
Raceway harness
with 8 & 4-pin
connectors
The 4-pin
connectors are
not used in this
application
4 1-800-810-WIRE • www.sargentlock.com • A7725B
Copyright © 2013, Sargen
t Manufacturing Company
, an A
SS
A AB
LO
Y G
roup company
. All right
s reser
ved
.
Reproductions in whole or in par
t without express writ
ten permission of Sargen
t Manufacturing Company is prohibited
.
3/4/13