SARGENT 8888 Reversible Rim Exit Device User Manual
Page 6
NOTE: THE LATCH BOLT SWITCH WILL COME
PRE-SET FOR THE MOST COMMON APPLICATIONS.
IF THE SENSITIVITY NEEDS TO BE ADJUSTED,
FOLLOW THE STEPS BELOW.
1. LOOSEN SCREW AND NUT
2. ROTATE SWITCH (UP FOR QUICKER
REACTION OR DOWN FOR
SLOWER REACTION).
3. TIGHTEN SCREW AND NUT
4. CHECK OPERATION
NOTE: MAKE SURE SWITCH IS
LOCATED ON THE MOUNTING
POST AND THE SCREW AND
NUT ARE SECURELY FASTENED
(-53) LATCH BOLT MONITERING
ADJUSTMENT
SIXTH
A6770P
Copyright © 2006, 2008, 2009, 2012 Sargent Manufacturing
Company, an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written
permission of Sargent Manufacturing Company is prohibited.
Using your mobile phone, scan this Microsoft
®
Tag.
Download the free mobile app at http://gettag.mobi