SARGENT 4370 - 4379 Key Switches - Manual (Page 2)

2
A7866A © SARGENT Manufacturing Company 2006
STEP 1.
Determine switch mounting height based on applicable standards and intended use.
Step 2.
Use the template provided to mark the clearance and mounting holes for the jamb switch. Cut out the opening and drill and tap for
#6-32 machine screws
Step 3.
Wire the jamb switch to the door control using the NO and COMMON contacts and test for activation.
Step 4.
Tighten screws through holes in cover plate with hex key provided
4397HP Jamb Switch
INSTALLATION INSTRUCTIONS
FOR ASSISTANCE, CALL SARGENT AT 1-800-727-5477.