SARGENT 858 Padlocks - Manual

Remove cylinder retainer from cylinder for repining.
Reverse steps to reassemble.
Note: Be sure shackle is in the same position and also the
key in the position in the cylinder during reassembly as it was
disassembled in order to keep padlock “timed”.
HOW TO REMOVE CYLINDER FROM
758 AND 858 PADLOCK
758 keying retaining padlock which requires key to lock
858 non key retaining padlock can be left open and closed/locked
without key
for installation assistance, contact sargent at 800-727-5477 • www.sargentlock.com
a7799b
a
Rotate key to release shackle.
Insert control key and turn
counterclockwise until
stop is reached. Insert control key and turn
counterclockwise until
stop is reached.
To remove key - return to vertical
position and withdraw. To remove key - return to vertical
position and withdraw.
Insert a 5/64” Allen wrench and remove retainer
screw as shown. Cylinder and retainer will drop
out together.
b c
Copyright
©
2005, 2008, 2011 Sargent Manufacturing
Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
A. C. D. B.
INSERT CONTROL KEY AND
TURN COUNTERCLOCKWISE
UNTIL STOP IS REACHED.
TO REMOVE KEY–RETURN
TO VERTICAL POSITION AND
WITHDRAW.
INSERT CONTROL KEY AND
TURN COUNTERCLOCK-
WISE UNTIL STOP IS
REACHED.
TO REMOVE KEY–RETURN
TO VERTICAL POSITION
AND WITHDRAW.
HOW TO REMOVE LARGE FORMAT
CYLINDER FROM 63-758 PADLOCK
HOW TO REMOVE OLD STYLE CORE
CYLINDER FROM 51- PADLOCK
WITH KEY IN
THIS POSITION
PULL OUT
CORE.
WITH KEY IN
THIS POSITION
PULL OUT
CORE.
A. C. D. B.
INSERT CONTROL KEY AND
TURN COUNTERCLOCKWISE
UNTIL STOP IS REACHED.
TO REMOVE KEY–RETURN
TO VERTICAL POSITION AND
WITHDRAW.
INSERT CONTROL KEY AND
TURN COUNTERCLOCK-
WISE UNTIL STOP IS
REACHED.
TO REMOVE KEY–RETURN
TO VERTICAL POSITION
AND WITHDRAW.
HOW TO REMOVE LARGE FORMAT
CYLINDER FROM 63-758 PADLOCK
HOW TO REMOVE OLD STYLE CORE
CYLINDER FROM 51- PADLOCK
WITH KEY IN
THIS POSITION
PULL OUT
CORE.
WITH KEY IN
THIS POSITION
PULL OUT
CORE.
A. C. D. B.
INSERT CONTROL KEY AND
TURN COUNTERCLOCKWISE
UNTIL STOP IS REACHED.
TO REMOVE KEY–RETURN
TO VERTICAL POSITION AND
WITHDRAW.
INSERT CONTROL KEY AND
TURN COUNTERCLOCK-
WISE UNTIL STOP IS
REACHED.
TO REMOVE KEY–RETURN
TO VERTICAL POSITION
AND WITHDRAW.
HOW TO REMOVE LARGE FORMAT
CYLINDER FROM 63-758 PADLOCK
HOW TO REMOVE OLD STYLE CORE
CYLINDER FROM 51- PADLOCK
WITH KEY IN
THIS POSITION
PULL OUT
CORE.
WITH KEY IN
THIS POSITION
PULL OUT
CORE.
HOW TO REMOVE LARGE FORMAT
CYLINDER FROM 63-758 PADLOCK
HOW TO REMOVE OLD STYLE CORE
CYLINDER FROM 51- PADLOCK
A. C. D. B.
INSERT CONTROL KEY AND
TURN COUNTERCLOCKWISE
UNTIL STOP IS REACHED.
TO REMOVE KEY–RETURN
TO VERTICAL POSITION AND
WITHDRAW.
INSERT CONTROL KEY AND
TURN COUNTERCLOCK-
WISE UNTIL STOP IS
REACHED.
TO REMOVE KEY–RETURN
TO VERTICAL POSITION
AND WITHDRAW.
HOW TO REMOVE LARGE FORMAT
CYLINDER FROM 63-758 PADLOCK
HOW TO REMOVE OLD STYLE CORE
CYLINDER FROM 51- PADLOCK
WITH KEY IN
THIS POSITION
PULL OUT
CORE.
WITH KEY IN
THIS POSITION
PULL OUT
CORE.
a c b d
With key in
this position,
pull out core. With key in
this position,
pull out core.