Tweco ProPlus Digital Auto-Darkening Welding Helmet - Manual (Page 14)

ProPlus Auto-Darkening Welding Helmets
14 Manual 0-5276
SECTION 5: Specifications
5.01 ProPlus Digital Auto-Darkening Filter lens
Description Auto-Darkening Filter lens
Optical Class: 1/1/1/2
Viewing Area: 97x62mm
Cartridge Size: 133x114x9mm
Number of Sensors: 4 Optical Sensors
Modes: Welding, Cutting, Grinding
Light State: Shade No. 4
Grind State: Shade No. 4
Cutting Mode Shades:
(Oxy/Fuel Welding And Cutting)
Shade No. from 5 to 8
Welding Mode Shades:
(MIG, TIG, Stick Arc Welding)
(Plasma Cutting & Plasma
Welding)
Shade No. from 8 to 13
Shade Control: Internal, Variable Shade, Digitally Controlled
Power On/Off: Manual-On, Auto-Off
Sensitivity Control: Low — High, Digitally Controlled
UV/IR Protection: All shades provide continuous UV/IR protection
Power Supplies: Replaceable 2 x CR2450 Lithium Batteries plus Solar Cell
Switching Time (Light to Dark): 0.00004 (1/25,000) Seconds
Delay Time:
0.1 ~ 1.0s
Low Amperage TIG Rated: ≥ 2 amps DC; ≥ 2 amps AC
Operating Temperature: -10°C ~ +55°C
Storing Temperature: -20°C ~ +70°C
Helmet Material: High Impact Resistant Nylon
Total Weight: 500g
Application range:
MIG (GMAW/FCAW), Stick (MMAW),TIG (GTAW), Plasma Arc Cutting (PAC), Plasma Arc
Welding (PAW), Air Carbon Arc Cutting (CAC-A), Oxyfuel Gas Welding (OFW), Oxygen
Cutting (OC), Grinding; DO NOT USE for Laser Welding
Table 5-1 Specifications
NOTE
Due to variations that can occur in manufactured products, claimed performance, voltages, ratings, all capacities, measure-
ments, dimensions and weights quoted are approximate only. Achievable capacities and ratings in use and operation will
depend upon correct installation, use, applications, maintenance and service.
5.02 Contents
CONTENTS - PROPlUS DIGITAl AUTO-DARkENING WElDING HElMET
Description Quantity
ProPlus Digital Auto-Darkening Welding Helmet 1
Welding Helmet Bag 1
Front Cover Lens 3
Rear Cover Lens 2
Sweat Band 1
Operating Manual 1
Table 5-2 Packing List