Tweco 130i Transarc Service Manual - Manual (Page 66)

TRANSARC 130i
DISASSEMBLY PROCEDURE 7-6 Manual 0-5282
7.07 Rear Panel Removal
!
Read and follow safety information in Section 6.03 before proceeding with disassembly
1. Remove 2 screws on rear panel.
2. Remove On/Off Switch wire.
3. Remove gas hose from gas inlet.
4. Remove ground screw.
5. Remove fan screws to disassemble the fan.
6. Remove power Cord by push the clip.
7. Remove On/Off switch by push the clip.
1
1
3
4
2
6
7
5
A-11860