Tweco 500P PowerMaster - Manual (Page 23)

POWERMASTER 500, 500P, 350
Manual No. 0-4749 2-7 INTRODUCTION
2.09 Power-Master 500P Specifications
Thermal Arc continuously strives to produce the best product possible and therefore reserves the right to change, improve or revise the specifications or design
of this or any product without prior notice. Such updates or changes do not entitle the buyer of equipment previously sold or shipped to the corresponding
changes, updates, improvements or replacement of such items
.
Line Voltage Line Current kVA Eff. PF Output
208 VAC/3 Phase 68 Amps 24.5 89% 0.83 450A/38V/100% Duty Cycle
230 VAC/3 Phase 62 Amps 24.7 90% 0.82 450A/38V/100% Duty Cycle
380 VAC/3 Phase 40 Amps 23.7 89% 0.84 450A/38V/100% Duty Cycle
400 VAC/3 Phase 35 Amps 24.2 90% 0.84 450A/38V/100% Duty Cycle
460 VAC/3 Phase 30 Amps 23.9 91% 0.84 450A/38V/100% Duty Cycle
208 VAC/3 Phase 88 Amps 31.7 89% 0.88 500A/40.0/60% Duty Cycle
230 VAC/3 Phase 82 Amps 32.7 89% 0.87 500A/40.0/60% Duty Cycle
380 VAC/3 Phase 50 Amps 32.9 88% 0.87 480A/39.2/60% Duty Cycle
400 VAC/3 Phase 43 Amps 29.8 91% 0.86 480A/39.2/60% Duty Cycle
460 VAC/3 Phase 39 Amps 31.1 90% 0.88 500A/40.0/60% Duty Cycle
Input Data
14.9 in / 378.5 mm
25.5 in /
64.7 cm
26.8 in /
68.0 cm
6.8 in /
172.7 mm
22.0 in / 55.9 cm
23.0 in / 58.4 cm
Art # A-06854
Net Weight: 154 lbs / 70 kg
Line Frequency: 50/60 HZ
Out put Current Range: 5 – 560 Amps
Out put Voltage Range: 10 – 44 Volts
Maximum Output Current: 600 Amps
Maximum Open Circuit Voltage (OCV): 70 Volts (57 Volts for CCC)
Operating Temperature Range: 32-104°F
Input Line Variations: ± 10%
Line Regulation: ± 1%
Load Regulation: ± 1%
Water Protection Class: IP23S
Figure 2-5: Power-Master 500P Dimensions and Weight