Tweco Merlin 6000 Slave PS - Manual (Page 31)

Manual 0-2570 5-3 CUSTOMER/OPERATOR SERVICE
5.04 Basic Parts Replacement
NOTE
For more detailed Parts Replacement Procedures
and Replacement Parts refer to Slave Power Sup-
ply Service Manual 0-2571.
The parts replacement procedures described in this
manual are for basic replacement of parts that requires
limited disassembly of the Power Supply.
WARNING
Disconnect primary power from the source before
disassembling the power supply.
A. Fuse Replacement
There are two fuses are located in the torch leads connec-
tion area under the hinged cover at the Front Panel. These
fuses are in a typical fuse holder that requires removal of
the fuse holder cap to replace the fuse.