tekmar 530 Thermostat User Manuals - Manual (Page 2)

© 2011 U 530 - 12/11 2 of 12
This brochure will provide you with the information you need to benefit the most
from your tekmarNet
® thermostat. Please visit www.tekmarcontrols.com for more
detailed information on this or any other tekmar product.
This thermostat provides heating, cooling, and fan operation for one zone in your
building. The cooling system may send cool air into more than one heating zone, in
which case this thermostat will coordinate the change from heating to cooling.
The fan can be run with heating, cooling, or on its own to provide fresh air through
ventilation.
With the addition of one of tekmar’s energy saving accessories, this thermostat can
also lower its temperature setting at night or when you are away from the house.
Temperature Adjustment
You will be adjusting the temperature of the current operating mode. To adjust
temperature settings that are not shown on the screen, you must enter into the
Adjust Menu as described in the “Adjust Menu” section. There may be other symbols
on the screen that affect thermostat operation. Please see the “Display Symbols”
section for a description of each symbol.
This thermostat can operate at day or night temperatures (see “Day or
Night Temperatures” section) for HEAT and COOL settings. The temperature
can be adjusted as follows:
Step 1: Press the or button until the desired temperature is displayed.
Step 2: Release all buttons and wait for the display to return to normal operation.
The adjusted settings will be saved in memory.
Adjustment Buttons
Adjust the temperature
HEAT or COOL
displays depending
on Mode
Indicates
whether the day
or night
temperature is
being set
(if available).
If in Auto mode, press
the Mode button to
toggle between Heat
or Cool temperature
adjustment.
Note: Remember to
turn the mode back to
Auto after adjustments
are made.