tekmar 512 Programmable Thermostat User Manuals - Manual (Page 5)

5 of 8 © 2009 U 512 - 09/09
Canceling a Temporary Override
To cancel a temporary override, press the Menu button once or twice if back light is not lit.
Permanent Override
NOTE: A permanent override stays in effect until a new override is selected. A permanent
override does not change the existing schedule.
Step One: Press and release the Menu button until the Schedule (SCHD) Menu is
displayed.
Step Two: Use the or button to select the desired permanent override.
Canceling a Permanent Override
To cancel a permanent override, use the following procedure.
Step One: Press and release the Menu button until the Schedule (SCHD) is displayed.
Step Two: Use the or button to select the None setting.
Away Override
An Away override is a quick override that does not change your existing schedule. This
is to be used during long periods of absence. When the Away override is selected, the
heating temperature is set to 62°F (16.5°C). If a slab sensor is being used with the
thermostat, the minimum slab temperature is also ignored. This operation continues as
long as the Away override is selected.
To select the Away override, use the following procedure.
Step One: Press and release the Menu button until the Schedule (SCHD) Menu is
displayed.
Step Two: Use the or button to select the Away override.
Canceling the Away Override
To cancel the Away override, use the following procedure.
Step One: Press and release the Menu button until the Schedule (SCHD) Menu is
displayed.
Step Two: Use the or button to select the None setting.