tekmar 512 Programmable Thermostat User Manuals - Manual (Page 2)

© 2009 U 512 - 09/09 2 of 8
Display Symbols
VIEWING THE CURRENT TEMPERATURE(S)
The View menu allows you to view the current temperature(s) being sensed by the
thermostat and its auxiliary sensor(s). To view the various temperatures, begin by selecting
the View menu using the
Menu button. Next use the Item button to view the available
temperatures.
Room: This is the current air temperature of the room that is being controlled. At least
one air sensor must be active for this temperature to be displayed.
Outdoor: This is the current outdoor air temperature. This item is only available if the
auxiliary sensor has been set to sense the outdoor air temperature.
Slab: This is the current slab temperature. This item is only available if at least one
of the auxiliary sensors has been set to sense the slab temperature.
Remote: This is the current temperature at the remote sensor. This item is only available
if the auxiliary sensor has been set to sense a remote temperature.
DEFAULT DISPLAY
The default display for the thermostat can be either the time found in the Time menu or any
item in the View menu. To select the default display, use the following procedure.
Step One: Use the Menu button to select either the Time or the View menu.
Step Two: Use the Item button to select the desired item.
Warning
Displays when an error exists.
Access Level
Displays when in the user
access level.
Heat One
Displays when the heat one
contact is on.
Early Start
Displays when the thermostat
is in early start.
Heat Two
Displays when the heat two
contact is on.
Cool One
Displays when the cool one
contact is on.