tekmar 403 House Control Installation - Manual (Page 19)

19 of 32 © 2011 D 403 - 07/11
Item Field Range Description
MONITOR -76 to 149°F
(-60.0 to 65.0°C)
OUTDOOR HIGH
Records the highest outdoor temperature since the item was
last cleared. Press and hold the Up and Down buttons while
viewing to reset.
MONITOR -76 to 149°F
(-60.0 to 65.0°C)
OUTDOOR LOW
Records the lowest outdoor temperature since the item was
last cleared. Press and hold the Up and Down buttons while
viewing to reset.
MONITOR hr 0 to 9999 Hours
Default = 0 hr
RUN TIME (BOILER)
The total ‘on’ time of the boiler relay since the item was last
cleared. Press and hold the Up and Down buttons while
viewing to reset.
MONITOR hr
DHW
Pumps
0 to 9999 Hours
Default = 0 hr
RUN TIME (DHW PUMP)
The total running time of the DHW Pump since this item was
last cleared. Press and hold the Up and Down buttons while
viewing to reset.
MONITOR hr
Boil System
Pumps
0 to 9999 Hours
Default = 0 hr
RUN TIME (BOIL SYSTEM PUMP)
The total running time of the Boil System Pump since this item
was last cleared. Press and hold the Up and Down buttons
while viewing to reset.
MONITOR hr
Saving
0 to 9999 Hours
Default = 0 hr
RUN TIME ($AVING)
Maintains a record of the total length of time the $aving icon
has been active. Press and hold the Up and Down buttons
while viewing to reset.
MONITOR hr 0 to 9999 Hours
Default = 0 hr
BOILER ENERGY USE
Multiply this value by the BTU rating (input BTU/hr) of the boiler
to get an approximate energy consumption (in BTU’s) for the
boiler. Press and hold the Up and Down buttons while viewing
to reset. Not available when Boiler Type is EMS1 or EMS2.
MON
IT
O
R
ME
NU
After the last item, the control returns to the first item in the menu.
The Monitor menu items provide information about the system’s operation and performance.
To clear any item back to default, press and hold the Up and Down buttons while viewing
that item.
Monitor Menu (1 of 1)