Citizen Systems CLP-8301 - Manual (Page 52)

Chapter 6 Configuring Your Printer Using the Menus
- 43 -
6.3 System Setup Menu
The System Setup Menu provides access to configure the hardware settings within the printer
such as the type of media sensor used and the threshold for gap detection, metric or imperial
(inches) selection, print resolution and time and date setting, if a clock module is installed. It
also allows for user access to the control panel and settings to be locked out to avoid
inadvertent changes.
* System
Setup
Media
Sensor
Sensor
Monitor Monitor
1.3V 314
Sensor
Level Level
0.0V Level
1.5V Level
3.3V
Buzzer
Select
Metric/
Inch
Sensor
See Thru Sensor
Notch Sensor
Reflec W Sensor
Reflec B Sensor
None
Buzzer
All Buzzer
Error Buzzer
Exec/Err Buzzer
Key Buzzer
None
Unit
mm/Inch Unit
mm/Inch
Top Form
Sensing Sensing
Yes/No Sensing
Yes/No
Range Toggle
Key
System Setup Menu
* **
* **
Shift
0.10IN Shift
1.00IN
Horizont
Shift Shift
- 1.00IN
Shift
2.5mm Shift
25.4m
Shift
- 25.4mm
Inch mode
Metric mode
* The last value (**) appears when DOWN
key is pressed.
** The first value (*) appears when UP key is
pressed.
(continued)
Note: Menu Item on LCD with bold
line is default.