Citizen Systems CLP-8301 - Manual (Page 25)

Chapter 4 Media (Paper) and Ribbon
---- 16 ----
¨ ¨ ¨ ¨
Center-punched hole tag
Holes (2.5mm diameter) are perforated lengthwise along the central line of the tag.
¨ ¨ ¨ ¨
Black mark tag
Black marks are printed on the back of the tag at the center or on the right side in the direction of
feed.
¨ ¨ ¨ ¨
Corner-with-a-radius cut tag
The cuts on the edge of this tag are deeper than the cuts on center-hole tag.