Citizen Systems CLP-8301 - Manual (Page 27)

Chapter 4 Media (Paper) and Ribbon
---- 18 ----
4.2 Media size
Minimum value mm (in) Maximum value mm (in)
A Label width 76.2 (3) 228.6 (9)
B Liner width 76.2 (3) 228.6 (9)
C Label left edge position 0 2.54 (0.10)
D Gap between labels 2 (0.079) 508 (20)
E Label length 12.7 (0.5)* 508 (20)
F Label pitch 12.7 (0.5) 508 (20)
G Liner thickness 0.06 (0.0024) 0.089 (0.0035)
H Paper total thickness 0.14 (0.0055) 0.254 (0.01)
I Notch right end position 3.75 (0.148) 140 (5.51)
J Notch length 3.75 (0.148) ¾
K Notch width 2 (0.079) 3 (0.118)
L Black mark right end position 6 (0.236) 140 (5.51)
M Black mark length 6 (0.236)
¾
N Black mark width 3 (0.118) 4 (0.157)
Note
· If media has both gap and black mark, use the transparent sensor.
· For fanfold, use the transparent sensor.
Left-side
margin
J
M
K
K
Media size
Printable area
Direction of paper feed
Black-line (back)
OD value: 1.5 or
more
Ink containing
carbon
Printing
area
Notch detection Black-line detection
Label Continuous paper
Use of paper-gap sensor Use of paper-gap sensor Use of black-line sensor
Printable area
H
G
B
A
C
I
I
L
F
D
E
N
109.75mm
4.55mm 219.5mm (default) 4.55mm