Citizen Systems CLP-8301 - Manual (Page 43)

Chapter 5 Power ON and Using the Control Panel
- 34 -
5.2 Turning the printer ON
Turn ON the power switch.
· Press “|” for ON.
· Press “O” to turn off the printer.
Once the power is turned ON, the following initial messages are displayed on the screen for
about three seconds.
Power ON
Firmware version is
displayed
CF000100
DD/MM/YY
System
Starting
Checking
Head
Passed
DD/MM/YY
00:00
Failed
XXX.XX mm The printer tests the
printhead for damage
Disconnected or damaged
printhead element position is
displayed in mm or inches
Pressing any key other
than
continues
to the next step Date and time are
displayed (if clock
module is installed)
READY