Kessler Crane: KC-12 - Manual (Page 5)

STEP 14
Replace the camera mounting screw that should already
be attached to your tripod head quick plate with the (2)
mounting screws.
STEP 15
Lock your quick plate into the tripod head and make sure that
you are able to tighten the plate securing lever very firmly.
IMPORTANT: For in depth instructions on how to correctly
adjust the mounting plate securing lever, please view the appro-
priate video at www.KesslerCrane.com
(Crane/Quickplate to Fluid Head Mounting Procedure)
STEP 13
Remove the (2) mounting screws from the pivot plate
located on the base frame section.
STEP 16
Pick up the crane and place it on your tripod so that the
pivot plate’s two outer holes line up with the (2) mounting
screws and tighten with the wing nuts.
STEP 17
Mount your camera to the camera basket using the supplied
thumb knob
STEP 18
Using a 5/32” Allen wrench, remove the outside weight bar
collar, flip the weight bar 180 degrees so that it extends
beyond the end of the crane’s frame, and reattach the collar.
Page 5