Kessler Crane: KC-12 - Manual (Page 3)

STEP 4B
If you purchased the optional Tool Less kit, insert the
stainless steal thumb knob, apply wing nut, and securely
tighten.
STEP 5
Attach the handle to the handle bar.
STEP 4
Place the crane onto its side and attach the control rods
together.
STEP 6
After inserting the coupler bars into the final segment,
leaving the ¼”-20 bolts slightly loosened, slide it into the
midsection checking to make sure it’s tight before secur-
ing the bolts.
STEP 6B
If you have purchased the optional Tool Less Kit, after insert-
ing the coupler bars into the final segment, leaving the ½”
threaded knobs slightly loosened, slide it into the midsection
checking to make sure its tight before securing the knobs.
STEP 7
Place the crane onto its side again and connect the last two
control rods.
Page 3