Gossen GL SpectroSoft - Manual (Page 9)

GOSSEN Foto- und Lichtmesstechnik GmbH 9
2.1.1 GL SPECTROSOFT for GL SPECTIS
Only GL_Spectrosoft is installed when you want to use devices using SPX Driver (GL
SPECTIS 1.0, GL SPECTIS 8.0). SPX driver must be installed in addition. Software is
set to work with SPX Driver devices.
2.1.2 GL SPECTROSOFT for MAVOSPEC
GL_Spectrosoft and Androdi USB Driver is installed. This instalation type set software
to work with Androdi USB Driver devices MAVOSPEC via USB cable.
2.1.3 GL SPECTROSOFT with many Devices
When you need to work with different devices using SPX and Android drivers
alternately:
1. Install GL SPECTROSOFT for GL SPECTIS touch.
2. Install SPX Driver.
3. Select Device in GL SPECTROSOFT main menu File->Settings
Types of connection:
1. Spectis - connect via SPX Driver (Spectis 1.0, Spectis 8.0).
TCP connection via SPX Driver. SPX driver must be installed and started. Set IP
address of a PC with SPX and device connected. Use default settings to connect on the
same PC.
2. MAVOSPEC - connect to android device
MAVOSPEC connection type can be set using a device preferences window.
Selected device
preferences button