Gossen GL SpectroSoft - Manual (Page 35)

GOSSEN Foto- und Lichtmesstechnik GmbH 35
8 Reports
A report template is a text file in HTML format. It can be created in any text or HTML. A
generated report is opened in default HTML browser.
9
Practical Notes

Make sure that the integration time is properly matched to the level of the tested
source. The best results are obtained by measuring between 40% and 90% signal
level. The value of the signal is visible on the top bar after each measurement.

If recommended conditions and time of measurement allows set repeated measure-
ments. This helps to reduce the impact of noise on the measurement results.

When measuring narrow band light sources like LEDs set limited spectral range of
the measurement. This significantly reduces the influence of stray light on the
measurement results.